• Accurate & repeatable results 
• Reduce product & packaging waste 
• Perform non-destructive & destructive testing 
• Improve worker safety 
• Calibrate in the field 
• Variable speed motor available 
• Wide range of accessories 

Testing Capabilities

• Removal Torque: With a single keystroke, the cap can be removed and reapplied to a designated torque level. The measured values can be stored in the analyzer’s memory. 
• Incremental Torque: The proper installation of a cap with an internal seal can be verified with this test. 
• Bridge Torque: This test determines the rotational force required to break the bands that bridge the gap between the cap and the tamper evident band on either an aluminum roll-on cap or a plastic cap. 
• Reverse Ratchet Torque: This measures the torque required to rotate a child-resistant cap in its free running state. 
• ROPP (Roll on Pilfer Proof): This test is designed to measure the torque required to open, break the bridges and then strip the threads on a Roll on Pilfer Proof cap. 
• Close: This selection enables the system to be used as a capping device. When used in this mode the actual closing value can be saved and outputted. 
• Strip: The strip test is designed to measure the torque required to drive the cap in a clockwise direction (close) in order to break the tamper evident band and remove the cap completely from the product. 

Technical Specifications

• Length: 18 in. (45cm) 
• Width: 13.8 in. (35 cm) 
• Height: 32 in. (82 cm) 32 in. 
• Weight: 160 lbs (Ship wt.) 
• Torque Range In-Lb (N-m): 5 – 200 in-lbs 
• Accuracy: +/- 0.125% FS on 5-20 in-lbs models, +/- 0.5% FS on 30-200 in-lbs models 
• Resolution: 1:1000 
• Speed Range: 1 RPM (1-8 RPM w/ multi-speed option) 
• Input/Outputs: RS-232 Cable, USB, Ethernet 
• Voltage: 100/240 VAC, 50/60 Hz 
• Amperage: 2.0A max 
• Operation Humidity: up to 90% (non-condensing) 
• Operation Temperature: 32-100°F (0 – 40°C) 
• CE Certification: Yes